How to use

Welcome to years of stress-free flushing, with your easy-to –clean, easy –to-use Eezy Flush.

Fitting the Easy Flush couldn’t be simpler.1

Just follow the 4 steps below.

First check that your pack contains all three of the Eezy Flush components:

The white plastic plunger (which resembles a mushroom)

The white plastic collar (which resembles a hollow volcano)

The flat, black, double-sided adhesive ring

 

Step-by-step fitting instructions

 

  1. Place the collar over the flush fitting on your toilet and make sure it sits cleanly onto the ceramic of the cistern.  The Eezy Flush is designed to fit over push-button mechanisms up to 65mm (2.5 in) across.  Check that the plunger fits over the moving parts and can operate them without obstruction.
  2. Peel one side of the backing paper off the adhesive ring and attach the ring to the ledge on the underside of the collar.
  3. Position the collar so that the hole is centred on your flush mechanism.  Then peel off the remaining backing paper and press the collar firmly into position.
  4. Push the plunger into the collar and test it by flushing your toilet.

 

If you need to remove the components of your Eezy Flush for any reason, use a sharp knife to ease the adhesive ring off the cistern.  You can re attach the Eezy flush by spreading a thin coat of Super-glue on to the ring.

 You can clean your Eezy Flush with any normal household or bathroom cleaner